Toilet Partition Stall Panels

Panels
  • Panel sizes range from 10" to 78" wide.
  • Panels are used between stalls, at the stall end, or used as part of a room screen.
  • Select from a variety of extra high quality, heavy duty hardware.
  • Actual panels are about 1/2" narrower than stated width. This leaves room for hardware.
  • Select reinforced panels if you will be putting grab bars on metal panels.
  • Panels wider than 26" cannot ship UPS. Please select "motor freight" during checkout. Choosing UPS will show an incorrect, much lower cost.
Powder Coated Metal Panels
• Standard panels are 1" thick x 58" high.
• Panels range in widths from 10" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height painted or stainless steel channels.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart
Price:$160
View Product »
Stainless Steel Panels
• Standard panels are 1" thick x 58" high.
• Panels range in widths from 10" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Select a reinforced panel if you will be installing a grab bar on your panel.
• Extra weldment areas along door edges provide greater strength.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear brackets, or full height stainless steel channels.
• Pricing is for standard #4 satin finish stainless steel. Please call for pricing and lead times on leather grain or diamond texture finishes.
• Lead time is approx. 3-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart
Price:$404
View Product »
Plastic Laminate Panels
• Panels are 1" thick x 58" high.
• Panels are available in widths from 12" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Decorative plastic laminate bonded under pressure to solid impact-resistant particle board core.
• Select from a variety of hardware to install: bright chrome or satin stainless steel two ear or one ear stirrup brackets, or a full height aluminum or satin stainless steel channels.
• Lead time is approx. 7-10 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart

*Directional Pattern: Pattern on panels over 60" wide will run perpendicular to pattern on doors and pilasters.
Price:$136
View Product »
Solid Plastic Panels
• Panels are 1" thick x 55" high.
• Panels are available in widths from 12" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Made of HDPE with same color throughout.
• Lightly textured surface hides vandalism.
• Water resistant and unaffected by steam or high moisture.
• Select from a variety of hardware: aluminum two ear or one ear stirrup brackets, or full height aluminum or satin stainless steel channels.
• Lead time is approx. 4-5 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart
Price:$247
View Product »
Solid Phenolic Panels - Black Core
• Panels are 1/2" thick x 58" high.
• Panels are available in widths from 12" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Decoratively faced on both sides of a resin-impregnated kraft paper core. The surface and core sheets are fused together at a high temperature and pressure.
• Superior strength, durability, and moisture resistance.
• Select from a variety of hardware: satin stainless steel two ear or one ear stirrup brackets or full height satin stainless steel channels.
• Lead time is approx. 5-7 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart
Price:$246
View Product »
Solid Phenolic Panels - Color Thru
• Panels are 1/2" thick x 58" high.
• Panels are available in widths from 12" to 78". Actual panel width is 1/2" smaller than stated size to allow for hardware.
• Adds value and durability to regular phenolic, with constant color throughout.
• Highly resistant to moisture, graffiti, and impact.
• Select from a variety of hardware: satin stainless steel two ear or one ear stirrup brackets or full height satin stainless steel channels.
• Lead time is approx. 7-10 days. Transit time is additional.
• Panels 26"W and over must ship via motor freight.

View Color Chart
Price:$272
View Product »