Stops and Keeper Bumpers

Chrome plated zamak. For inswing doors. 1-1/2" between screws. Used where you want emergency access capability. Surface mounted. Can be used on any thickness pilaster.

Chrome plated zamak. 1-1/2" between screws. Surface mounted. Can be used on any thickness pilaster.

Chrome plated zamak. 1-1/2" between screws. Surface mounted. Can be used on any thickness pilaster.

Made of stamped stainless steel. 1-7/8" between screws. Use where door and pilaster are same thickness. Use A7055, A7056 and A7057 together.

Stamped stainless steel; 1-7/8" between screws. Use where door and pilaster are same thickness. Use A7055, A7056 and A7057 together.

Chrome plated zamak. For surface mounted latches, inswing door. 1-1/2" hole centers. For 1 1/4" thick, round edge pilasters.

Chrome plated zamak. For surface mounted latches, outswing door. 1-1/2" hole centers. For 1 1/4" thick, round edge pilasters.

Chrome plated zamak. For 1 1/4" thick round edge pilaster. Typically used on metal partitions with round concealed latch slide pin. For inswing or outswing doors.

For 1-1/4" thick round edge pilaster. Used on Metpar metal partitions with flat concealed latch slide pin. For inswing or outswing doors.

Chrome plated zamak. For 1 1/4" thick round edge pilaster. Typically used on metal partitions with square concealed latch slide pin. For inswing or outswing doors. Replacement for Hadrian.

Chrome plated zamak. For 1 1/4" thick round edge pilaster. Typically used on metal partitions with round concealed latch slide pin. For inswing or outswing doors. Replacement for Knickerbocker.

Chrome plated zamak. For 1 1/4" thick round edge pilaster. For outswing doors.

Chrome plated zamak. For 1-1/4" round edge pilasters. For inswing doors.

Chrome plated zamak. For surface mounted latches, outswing door. 1-1/2" hole centers. For 1" thick (#A5720) or 1-1/4" thick (#F0303) square edge pilasters.

Chrome plated zamak. For surface mounted latches, inswing doors. 1-1/2" hole centers. For 1" (#A5620) or 1-1/4" thick (#F0304) pilasters.

Chrome plated zamak. For throw or slide bolt latches, inswing doors. 1-1/2" hole centers. For 1" (#A5820) or 1-1/4" (#S410T) thick square edge pilasters. Emergency access.

Chrome plated zamak. For inswing or outswing doors. For 1 1/4" thick square edge pilaster. 1-1/2" hole centers. For round shaped concealed latch slide pin.

Replacement rubber for stops and keepers. 1/2" x 2-1/2". Can be cut to fit.

Chrome plated zamak. For throw or slide latch. For 1-1/4" thick square edge pilaster. Emergency Access. Inswing door.

Chrome plated zamak. For 1 1/4" thick square edge pilaster. Inswing or outswing doors. Used with round concealed latch slide pin.

Chrome plated zamak. For 1 1/4" thick square edge pilaster. For outswing doors.

Bright aluminum. For 1" thick pilasters. 6" high. For outswing doors. Used on Hiny Hiders by Scranton Products, formerly known as Comtec, Santana, and Capitol.

Bright aluminum. For 1" thick pilasters. 6" high. For inswing doors. Used on Hiny Hiders by Scranton Products, formerly known as Comtec, Santana, and Capitol.

Chrome plated zamak. Mounts on flat wall. For surface latch. Outswing door. 1-1/2" hole centers.

Chrome plated zamak. Mounts on flat wall. For inswing or outswing door. 1-1/2" hole centers. Used with concealed latch round slide pin.

Chrome plated zamak. Mounts to flat wall. For surface latch. Inswing door. 1-9/16" between screws. Replacement for Mills / Bradley.

Chrome plated zamak. Mounts to flat wall. For surface latch. Inswing door. 1-1/2" between hole centers. Allows for emergency access.

Chrome plated zamak. Mounts on flat wall. Used with throw or surface mounted slide latch. Allows emergency access.