Brackets, Braces & Clips | All Types, All Manufacturers

• "U" brace for 1 1/4" thick pilasters
• "L" brace fits any size pilaster or panel up to 1 1/4" thick.
• Height adjusts 7 1/2" to 14"

• 1.375" long x 1.5" high
• Chrome Plated
• Part # A0191 would be used to connect 1" panels to intermediate stall pilasters

• 2.5" long x 1.5" high chrome plated.

• 2.5" long by 1.5" high chrome plated

• The 1" A1280 & 1-1/4" A1330 sizes are 3-1/2" long.
• The 3/4" A1590 size is 2-1/2" long.
• Part number A1280 is pictured.

• Adjusts to fit any size pilaster/ panel/ screen
• 3 1/3" long by 1 1/2" high
• Chrome plated

• 1.5" high x 1.75" long x 1.75" wide.

• 1" panel to 1-1/4" pilaster

• 2 per set
• Used to join panel edge to pilaster or panel edge
• Part #A8340 is chrome plated zamak (shown above)
• Part# A8369 is stainless steel

• 54" High Aluminum "H" Bracket.
• Joins 1" Panels or Pilasters.

• A2794 and A0191C are 1.375" long; A2799 and A2369 are 1.5" long
• For 1 inch thick panel
• Cast Aluminum or Stamped Stainless Steel
• Holes per bracket: 54"-5, 57"-5
• Use screws in all holes for a strong installation.

• For 1" thick panels and screens
• 2-3/4" long
• Cast aluminum and stamped stainless steel
• Holes per bracket: 54"-5, 57"-5
• Use screws in all holes for a strong installation

• For 1-1/4" thick pilasters
• 2-3/4" long
• Cast aluminum are 57-1/2" high and stamped stainless steel are 57" high
• Holes per bracket: 57"-5
• Use screws in all holes for a strong installation.

• 2.5" long for 1" panel/pilaster/screen
• Cast Aluminum or Stamped Stainless Steel
• Holes per bracket: 41"-4, 54"-5, 57"-5
• Use screws in all holes for a strong installation.

• 57" height by 2 3/4" long by 1 3/8" wide.
• Cast aluminum material.
• Holes per bracket: 57"-(5).
• Use screws in all holes for a strong installation.

• Chrome plated
• View PDF of Bracket Dimensions

This item has been discontinued. See below options.
• For 1.5" x 1" rectangular tubing

• Chrome plated
• Dimensions are width and height of rectangular part of opening that end cap goes into
• #A0665 is used on Accurate Partition headrail, and our type b headrail sold above.

Eliminate gaps with this 60" long, 1/8" offset, clear anodized aluminum privacy strip.

Does not come pre-drilled. Drill your own holes where you want them.

For providing privacy only. Not for extra support.

Screws sold separately. Click here to order screws.

• Privacy covers eliminate gaps between doors and panels to ensure privacy.
• Sold by the set - each set includes (2) 58" pieces.
• Self-adhesive.

• Used to install partitions at an angle
• Wrap around part grabs onto a 1 1/4 in. pilaster or a 1 in. panel
• 2 1/2" long
• Stamped stainless steel.